An Ossel Hitch Knot is a reliable hitch knot used to attach a rope to a fixed object, such as a post, ring, or dock. Many sailors and climbers use this knot due to its secure hold and ease of tying.
Ossel Hitch Knot: Quick Tying Guide
To tie an Ossel Hitch Knot, start by wrapping the working end of a rope around the rope or other anchor point it is being attached to. Create a loop by passing the working end behind the standing line of the rope you’re working with, and then bring it back around the other rope a second time but in the opposite direction as the first time around. Next, pass the working end of the rope back over itself and then push it through the original loop. Pull both ends to tighten and complete the knot.
Why Use an Ossel Hitch Knot?
The Ossel Hitch Knot is valued for its strength and versatility. It holds securely under tension and is simple to tie and untie, even after bearing a load. This knot is ideal for mooring, climbing, or securing gear, though it’s less effective when tied on smooth or slippery surfaces.
Knots Similar to the Ossel Hitch Knot
Clove Hitch – A quick and adjustable knot used for temporary fastening.
Round Turn and Two Half Hitches – Provides a secure hold for ropes under strain.
Bowline Knot – Creates a fixed loop at the end of a rope, commonly used in sailing and rescue operations.
Sheet Bend – Ideal for joining two ropes of different diameters.
Step 1:
Wrap the working end of a rope around the rope or other anchor point it is being attached to.
Step 2:
Create a loop by passing the working end behind the standing line, and then bring it back around the other rope a second time but in the opposite direction as the first time around.
Step 3:
Pass the working end of the rope back over itself and then push it through the original loop.
Step 3a:
Pull both ends to tighten the knot securely
